Part Number Hot Search : 
03K00 16004G UZ117 VWP1137 8T131 5236B 689E3 IN4816
Product Description
Full Text Search
 

To Download STG719STR Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  1/8 april 2002 n high speed: t pd = 0.3ns (typ.) at v cc = 5v t pd = 0.4ns (typ.) at v cc = 3.3v n low power dissipation: i cc = 1 m a(max.) at t a =25c n low "on" resistance: r on = 4 w (max. t a =25c) at v cc = 5v r on = 6 w (typ.) at v cc = 3v n wide operating voltage range: v cc (opr) = 1.8v to 5.5v single supply description the stg719 is an high-speed spdt cmos switch fabricated in silicon gate c 2 mos tecnology. it designed to operate from 1.8v to 5.5v, making this device ideal fro prtable applications. it offers 4 w on-resistance max at 5v 25c. additional key faetures are fast switching speed (ton=7ns, toff=4.5ns) and low power consumption (<0.001mw typ.). esd immunity is higher than 1000v per method 3015.7 of mil-std-883b. its available in the commercial temperature range. stg719 low voltage 4 w spdt switch pin connection and iec logic symbols order codes package t & r sot23-6l STG719STR sot23-6l
stg719 2/8 input equivalent circuit pin description truth table absolute maximum ratings absolute maximum ratings are those values beyond which damage to the device may occour. functional operation under these condit ion is not implied recommended operating conditions 1) truth table guaranteed: 1.2v to 6v 2) v in from 30% to 70% of v cc pin no symbol name and function 1 in control 4, 6 s1, s2 independent channel 5 d common channel 3 v cc positive supply voltage 2 gnd ground (0v) control switch s1 switch s2 l on off h off on symbol parameter value unit v cc supply voltage -0.5 to +7.0 v v i dc input voltage -0.5 to v cc + 0.5 v v ic dc control input voltage -0.5 to v cc + 0.5 v v o dc output voltage -0.5 to v cc + 0.5 v i ik dc input diode current 20 ma i ok dc output diode current 20 ma i o dc output current 50 ma i cc or i gnd dc v cc or ground current 50 ma t stg storage temperature -65 to +150 c t l lead temperature (10 sec) 300 c symbol parameter value unit v cc supply voltage (note 1) 1.8 to 5.5 v v i input voltage 0 to v cc v v ic control input voltage 0 to v cc v v o output voltage 0 to v cc v t op operating temperature -55 to 125 c dt/dv input rise and fall time (note 2) 0 to 10 ns/v
stg719 3/8 dc specification (*) voltage range is 3.3v 0.3v (**) voltage range is 5v 0.5v ac electrical characteristics (c l = 35pf, r l = 300 w ) (*) voltage range is 3.3v 0.3v (**) voltage range is 5.0v 0.5v symbol parameter test condition value unit v cc (v) t a = 25c -40 to 85c -55 to 125c min. typ. max. min. max. min. max. v ihc high level control input voltage 3.3 (*) 2.0 2.0 2.0 v 5.0 (**) 2.4 2.4 2.4 v ilc low level control input voltage 3.3 (*) 0.4 0.4 0.4 v 5.0 (**) 0.8 0.8 0.8 r on on resistance 3.3 (*) v s = 0 to v cc i s = 10ma 67 10 w 5.0 (**) 45 d r on on resistance 3.3 (*) v s = 0 to v cc i s = 10ma 0.1 0.4 w 5.0 (**) 0.1 0.4 r flaton on resistance flatness 3.3 (*) v s = 0 to v cc i s = 10ma 2.5 w 5.0 (**) 0.75 i soff source off leakage 3.3 (*) v s =1v or v cc v dd = v cc or 1v v in = v cc or gnd 0.01 0.25 0.35 0.35 m a 5.0 (**) 0.01 0.25 0.35 0.35 i son channel on leakage 3.3 (*) v s =v d =1v to v cc -2.5v v in = v ihc 0.01 0.25 0.35 0.35 m a 5.0 (**) 0.01 0.25 0.35 0.35 i in control input leakage current 3.3 (*) v i = v ih or v il 0.005 0.1 m a 5.0 (**) 0.005 0.1 i cc quiescent supply current 3.3 (*) v i = v cc or gnd 0.001 1 1 m a 5.0 (**) 0.001 1 symbol parameter test condition value unit v cc (v) t a = 25c -40 to 85c -55 to 125c min. typ. max. min. max. min. max. t pd delay time 3.3 (*) v s = 3v square wave f = 1mhz t r = t f = 6ns 0.4 0.8 1.2 ns 5.0 (**) 0.3 0.6 1.0 t on on channel time 3.3 (*) v s = 2v 10 16 ns 5.0 (**) v s = 3v 711 t off off channel time 3.3 (*) v s = 2v 5.5 7 ns 5.0 (**) v s = 3v 4.5 6 t d break before make time delay 3.3 (*) v s = 2v 14 ns 5.0 (**) v s = 3v 14 c soff off channel capacitance pf c son on channel capacitance pf
stg719 4/8 analog switch characteristics (gnd = 0v; t a = 25c) (*)voltage range is 3.3v 0.3v (**) voltage range is 5.0v 0.5v test circuits on resistance on leakage off leakage off isolation symbol parameter test condition value unit v cc (v) typ . f max frequency response (switch on) 3.3 (*) bandwidth at -3db 200 mhz 5.0 (**) 200 feedthrough attenuation (switch off) 3.3 (*) f in = 10mhz sine wave -40 db 3.3 (*) f in = 1mhz sine wave -74 5.0 (**) f in = 10mhz sine wave -40 5.0 (**) f in = 1mhz sine wave -74 crosstalk (channel to chabbel) 3.3 (*) f in = 10mhz sine wave -39 db 3.3 (*) f in = 1mhz sine wave -52 5.0 (**) f in = 10mhz sine wave -39 5.0 (**) f in = 1mhz sine wave -52
stg719 5/8 bandwidth channel to channel crosstalk switching times break before make time dleay
stg719 6/8 dim. mm. mils min. typ max. min. typ. max. a 0.90 1.45 35.4 57.1 a1 0.00 0.15 0.0 5.9 a2 0.90 1.30 35.4 51.2 b 0.35 0.50 13.7 19.7 c 0.09 0.20 3.5 7.8 d 2.80 3.00 110.2 118.1 e 2.60 3.00 102.3 118.1 e1 1.50 1.75 59.0 68.8 e0.95 37.4 e1 1.9 74.8 l 0.35 0.55 13.7 21.6 sot23-6l mechanical data
stg719 7/8 dim. mm. inch min. typ max. min. typ. max. a 180 7.086 c 12.8 13.0 13.2 0.504 0.512 0.519 d 20.2 0.795 n 60 2.362 t 14.4 0.567 ao 3.13 3.23 3.33 0.123 0.127 0.131 bo 3.07 3.17 3.27 0.120 0.124 0.128 ko 1.27 1.37 1.47 0.050 0.054 0.0.58 po 3.9 4.0 4.1 0.153 0.157 0.161 p 3.9 4.0 4.1 0.153 0.157 0.161 tape & reel sot23-xl mechanical data
stg719 8/8 information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no res ponsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result f rom its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specificati ons mentioned in this publication are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics products are not authorized for use as critical components in life support devi ces or systems without express written approval of stmicroelectronics. ? the st logo is a registered trademark of stmicroelectronics ? 2002 stmicroelectronics - printed in italy - all rights reserved stmicroelectronics group of companies australia - brazil - canada - china - finland - france - germany - hong kong - india - israel - italy - japan - malaysia - malt a - morocco singapore - spain - sweden - switzerland - united kingdom - united states. ? http://www.st.com


▲Up To Search▲   

 
Price & Availability of STG719STR

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X